Wednesday, July 11, 2012

LEGO Minecraft Chicken Instructions


Overview


At the prompting of many fellow Redditors, I am making instructions to construct a LEGO Minecraft Chicken. Hopefully this will result in massive Karma to myself, as well as a pat on the back from Notch. Personally though I hope it just results in everyone having a LEGO Minecraft chicken.

Note/Personal Plea: Writing up this tutorial took me hours of work. This is on top of building this chicken not once, but three separate times to minimize the number of pieces used. I came up with the design for the chicken on my own without any guidance or assistance. Please do not copy paste this somewhere else without giving me credit. I put in a lot of effort into making this guide and I would like credit for it. That's all I ask for. People asked me for a tutorial and I am happy to oblige but I do not like other people who would post it as their own.



Note: if you attempt to kill this chicken, it will drop neither feathers nor poultry. 

There are several differences between the chicken I have here today and the original. The final product is essentially the same except that it is sturdier and the head does not pop off like in the original. I have optimized the build to include as few pieces as possible. The only place that you could use less pieces in is with the tiling on the top of the chicken and on its nose. The only reason I have not done so is because I do not own enough tile pieces to minimize the number needed. You can easily substitute out the tiles on your own if you wish.



The main difference between the original chicken and this one though is the inclusion of working wings. With the swapping out of a few pieces from the original, your LEGO Minecraft chicken will now be able to fly.*

*Your LEGO Minecraft chicken will not actually be able to fly.

The Pieces





The build is a total of 97 pieces, give or take one or two because I can't count to save my life. Also if you choose to use fewer tile pieces, you can shave off a few pieces there.


These are the bricks you will be using in a smaller condensed shot. This excludes the tile and plate pieces that are also needed.


NOTE: These pieces are different! There is a slight indentation on two of these bricks. These two bricks are used for the eye pieces on the chicken. In order to achieve the flat black look, these pieces are used for the eyes. The four other similar but different bricks are used to attach the beak to the face.

For your convenience I am including a link to Bricklink for each of the pieces you will need. Bricklink is THE online community for LEGO pieces run solely by LEGO Fans around the world. I cannot guarantee availability or prices for any of the pieces on there. I just hope that this helps. I will also include a breakdown of how many of each brick you need.

NOTE: When purchasing white bricks from Bricklink be sure to note whether or not the owner says they are yellowed. One of the earlier mixtures of plastic for the white, gray and dark gray bricks was prone to yellowing, creating an off color white with a yellow tinge. You will notice that some of my bricks in this guide are off white and that is because they are older. If you want the whitest LEGO Minecraft chicken, be aware when making a purchase! Also be aware of whether or not the bricks are used, worn, or scratched. Also be aware of where the person you are buying from is located. If they are not in the same country, it is probably cheaper to buy from someone else. Each shop on Bricklink has different restrictions and requirements. Pay attention to them.

Always shop around! Bricklink isn't the only way to get LEGO over the Internet, but it is probably the cheapest. You can order all of these LEGO pieces direct from LEGO, but it would be a heck of a lot more expensive, as well as taking much longer depending on your location in the world (because they ship only from Denmark if you buy from their online Pick A Brick selection.)

15 2x4 White Brick
1 2x3 Red Brick
2 1x1 Black Tile
4 1x2 White Tile
2 1x3 White Tile
6 1x4 White Tile
5 2x2 White Tile
2 2x4 White Tile
1 2x2 Red Tile

Total = 97 Pieces

The Build


The build of the chicken is very simplistic. For the most part, the entire build is basically built straight from the bottom up and the only inclusion of any sort of technique is for the face when attaching the beak and the eyes. Have your pieces? Here we go.


1. 


This is the base of your chicken. It is four 2x6 pieces and one 1x6 piece. The 1x6 piece is in between the larger bricks.


2.


These pieces will be the next level of your chicken. Add them to the top of the bricks you laid out in Step 1.




Your chicken should now look like this.


3.


This is the third layer to your chicken. It is very similar to Step 2. except that it has a different central pattern. The pattern isn't very important so don't mind it. Just make sure you get those bricks in.




Add those bricks to the top of your build. I realize now that the pattern is different from how I had it set up in the last photograph. This is the hazard of taking instructional pictures while deconstructing the chicken. Either way will work though.

4.




The fourth layer to your LEGO Minecraft chicken. The gap is intentional. This is where the chicken's head will go later.




Add the fourth layer on and you will start to see the shape of your chicken's body forming.


5.




This is the final layer of your chicken's body. The bricks are not as long because in the next step we will be adding wings to the chicken.



Your chicken's body is now complete.

6.


a.




For step number 6, you will need these pieces. These pieces constitute both wings.




Take half of those pieces. This is one wing.




Now I'm assuming since you have actively chosen to follow my directions that you can figure out this step, so there is no video of me clicking these pieces together. Take the two 1x6 bricks, put them on top of each other. Now add the piece with the hinge and snap that on top of the 1x6 bricks (the hinge can swing either way.) Now add the 1x4 brick. Tada! You have a wing.

b.


Do the same thing except have the hinge swing the opposite direction.

c.

Add the wings to the body. Your body is coming together nicely now.

7. 


These are all the pieces that you will need for the brick portion of the chicken head. It is kind of terrifying without the tiling and the beak.




Step 7. is to simply get the 2x4 tile piece out. Simple huh?


8.




Attach the two 2x4 bricks to the 2x4 plate. 





9.


Now add these three bricks on top as shown below.



10. 



Add these 5 bricks on top as shown below. Note that these four 1x1 bricks face forward on the chicken's head and have no indentation to them. The two remaining pieces that are similar to these four will be used in the next step and make up the eyes. You can see them in the background of this picture.




11.



The brick portion of the head is nearly complete! Add these four pieces to the top of the head.




This is kind of terrifying looking.


12. 




Add these two pieces to the top of the head.




The head should now look like this. It is still terrifying to behold.

13.




Take the head you just built and attach it to the body of the chicken. You now have a chicken monstrosity. Don't fret, the details are coming up next.


14.


These pieces make up the beak and wattle. For those of you who don't know, the wattle is the red hanging portion.




Flip the 2x4 yellow brick over and arrange the 1x2 yellow bricks as shown. You probably know where the red 2x3 brick is going.




Regardless of whether or not you knew where the red piece was going I included a picture of it just to be safe.




Your product should now look like this. 




Attach your beak and wattle to the face of your chicken head. It is much less terrifying now.


15.


Now we start moving onto the details with the addition of the tiles. These tiles (as you can probably guess) go on the face of the chicken. Add the two block 1x1 tiles to the eyes. Add the two 2x2 yellow tiles to the beak and the one 2x2 red tile to the wattle.





Your chicken should be easily recognizable now. 


16. 


Your chicken isn't finished yet though! In order to achieve the smooth Minecraft look, he needs tiling! 




I cannot stress enough that for the most part, it does not matter how you tile the chicken. This pattern will work with the tiles I have provided, but it could be a lot more simplified and with fewer pieces. For example, the wing pieces could simply be 1x6 tiles instead of two tiles per wing. The tiles in the middle of the body could be simplified even further. Same at the base of the neck. The only tiles that you really cannot mess with are the 1x3 tiles and that's because they cover up the wing hinges. 




After adding the tiles, your chicken should look like something like this. You should note that I did not even follow my own tile specifications and instead used three 1x4 tiles on the head. It really does not matter as long as all the studs are covered. 


17. 

a.


The final part of your chicken! By now these should be the only pieces you have left anyways. Take three 1x1 yellow bricks and stack them on top of each other. Now do it again! Take the two 1x3 plates and place them as shown below.

b.


Now put it all together like this and you have your feet.


c.


Stick your feet on to the bottom of the chicken in the spots shown here. This will allow your chicken to stand up without any other support. Note: Out of the two directions shown here, it does not matter which way the 1x3 plates on the bottom of the feet are facing. I have tried both ways and with either way the chicken should stand up. It seems to be sturdier when the feet on the bottom are facing forward though, rather than out to the side. I hope this helps.


18.


Smile! You've got a LEGO Minecraft chicken.

62 comments:

  1. Replies
    1. You're welcome. I'm going to submit this idea to LEGO CUUSOO soon (right after I optimize it again and make the legs more secure). Maybe one day it will be a real set.

      Delete
    2. cool i recomend you do othere mobs like enderman and creepers and cows pigs and stuff

      Delete
    3. Nice, going to make on Lego Digital Designer

      Delete
    4. http://www.mediafire.com/?8je3svvs5dqwz27
      Lego Digital Designer: Minecraft Chicken

      All Creds go to the original creator,
      I just followed this guide and made it in digital form xD

      Delete
    5. hey sell your idea to lego
      if you build more sets you may even get quite a nice sum out of it all

      :)

      p.s if you make a fortune give me some XD

      Delete
    6. Wow this thing is AWSOME my sister got into college because of this.(don't ask) since lego has just put out a minecraft set you should sell this to them

      Delete
    7. -Wow this thing is AWSOME my sister got into college because of this.(don't ask) since lego has just put out a minecraft set you should sell this to them-

      im sorry i have to ask XD

      Delete
    8. this is really cool I just built it now and my friends who love Minecraft love it too! ur cool, creative, and awesome!

      Delete
  2. Love this I have already ordered the bricks from LEGO.com. Sadly the don't have the full height hinges in white so I went with 3 of the thin ones on each side instead I hope it will work out.

    Great idea and work, this is very worthy of a CUUSOO set!

    ReplyDelete
    Replies
    1. How much did it cost to buy from lego.com?

      Delete
  3. This creation is now on LEGO CUUSOO. I need your support to make this a real LEGO set.

    http://lego.cuusoo.com/ideas/view/21329

    ReplyDelete
    Replies
    1. I support this projec!!!

      Delete
    2. I also support it!

      Delete
  4. Wow! Awesome! Project supported! :D

    ReplyDelete
  5. HALLO! I have made this on LDD, and it turned out perfecty\. The feet, however, I changed to their actual shape in-game

    ReplyDelete
    Replies
    1. How did you do this? Did you double down on the plates needed for the feet? I tried this at first and thought it looked too awkward.

      Delete
  6. Awesome job man! Now try to make the other mobs. :)

    ReplyDelete
  7. Congratulations, you got featured on the official minecraft forums.

    ReplyDelete
    Replies
    1. Thanks. I've commented on the thread over there.

      Delete
  8. Wow, this is amazing! You deserve a prize :D

    ReplyDelete
    Replies
    1. If you support me over on LEGO CUUSOO (http://lego.cuusoo.com/ideas/view/21329) it would be like me getting a prize.

      Delete
  9. you should make a lego steve mini version

    ReplyDelete
  10. Hey i'd recommend one of the flat 1x2 bricks with the single stud on top for the foot and putting the toes on the bottom of there :) it'll add more support to the legs :D

    ReplyDelete
  11. AWSOME!!
    could i help you with a lego steve?

    ReplyDelete
  12. It is pretty sick bro what is your IGN in minecraft. Also you should try this multiplayer server called Realmcraft, it has 2 servers Black and Blue.

    P.S. I am on black. Also I supported it on CUUSOO

    ReplyDelete
    Replies
    1. My in game name is the same as my name on here, legitimatealex.

      Delete
  13. Great job. My son is looking over my shoulder right now, demanding that I buy these pieces STAT. Looks like we'll have a little project soon. Thank you for all the great details and pictures. This is really good!!

    ReplyDelete
    Replies
    1. You're quite welcome. If you're looking to avoid some of the hassle with getting the pieces, you can order everything from LEGO. Depending on where you are in the world though, it will take a while to arrive since it is coming from Denmark. If you're fine ordering off of Bricklink.com, you can get it a lot cheaper.

      Delete
    2. We live in Minneapolis, so there's a good chance we can get all the parts at the huge LEGO store at the Mall of America. We'll try that first, then prolly order them from one or the other places. We're a LEGO loving family, so it's always fun to go shopping. :D

      Delete
    3. Also, supported on CUUSOO and tweeted. :)

      Delete
    4. Your tweet is the only tweet that I can find when I search on Twitter for CUUSOO supporters. I find that odd but comforting that I can find at least one.

      Good luck in building the chicken : )

      Delete
  14. Nice pictures, high quality... beautiful

    ReplyDelete
    Replies
    1. You'd be surprised how many times I had to go back and redo shots because I had inadvertently skipped a step.

      Delete
  15. Nice job, the instuction 13 makes the chicken look like an iron golem.

    ReplyDelete
    Replies
    1. Now there's something I should make in LEGO. I'm working on my blaze right now.

      Delete
  16. you are awesome... a minecraft chicken is awesome MINECRAFT IS AWESOME... you are famous I guess because on Minecraft Forums they have put a link to this page and that is where i found it!

    ReplyDelete
    Replies
    1. Haha I've always wanted to be 'Internet' famous. I've posted the instructions on multiple sites around but I guess they never took off much because I'm getting much more of a reaction from being front paged my the Minecraft forums than anywhere else. Feels good.

      Delete
  17. I didn't have enough of the flat-edged pieces for the section to hold the beak on, so I substituted a white vertical hinge piece for two of them.. I expect someone without the appropriate pieces could use two to cover all four of them, since they do get completely covered by the beak. And yes, the chicken is awesome.. am glad I had all the pieces I needed to make one. :)

    ReplyDelete
  18. TWEETED! sooooo love this idea. i wanna make one now, super glue the parts together and put it on top of my tower when i'm logged into my world lol.

    ReplyDelete
    Replies
    1. It's already pretty stable so you can avoid super gluing it, although the way you phrased this comment I think you don't have the pieces at the moment and that is always a shame : (

      If you click the link at the top of the page you can support this idea to LEGO and hopefully it will become a real bona fide set one day.

      Delete
    2. This comment has been removed by the author.

      Delete
    3. no, i don't have *any* of the pieces yet, but i will soon i hope and i'll be clicking on the link in the next few seconds. really, i'd love to see all the mobs become official lego sets. oh...how can i forget steve! lol or herobrine for that matter.

      Delete
  19. Dude I registered on CUUSOO just to support this. :D

    ReplyDelete
    Replies
    1. Don't forget to support other worthy projects. There are a ton on there. Thank you for your support.

      Delete
  20. This is freakin' awesome dude! I'm sooo excited for the creeper model xD I hope it's your next one ;)

    ReplyDelete
  21. Cool, I just built a copy of your creation! Already had all the pieces, modulo a few substitutions:

    I didn't seem to find any white 1x1 with stud on side, but I had some 1x4 with stud on side:

    http://www.bricklink.com/search.asp?q=4143254

    Also, 1x3 white tiles seem to be rare or nonexistent in my collection, but could be readily replaced by 1x4 white tiles.

    Thanks for sharing!

    ReplyDelete
  22. Hey, I've just recived a free minecraft giftcode!
    You can get too!

    >>minecraftcodes.me<<

    ReplyDelete
  23. Hey, I've just received a free Minecraft Giftcode!
    You can get one too!

    >> minecraftcodes.me <<

    ReplyDelete
  24. Stephanie Thompson tstephanie67@yahoo.com

    We love legos! This is cute! Will be making it tomorrow.

    ReplyDelete
  25. out of curiosity have you modefyed the creation any way since it was put on the minecraft fourms

    ReplyDelete
  26. hi i luv it mi bro luvs it 2 we pla wit it evry dey 1nce he kisd it and i lafd so hrd i almst dyed thx u fr it

    ReplyDelete